Dynapath DY-14 14"x40" CNC Flat Bed Engine Lathe with 10" Chuck, Dorian 8 Station Manual Tool Turret, and Tailstock.
LOT No: 65Category: Engine, Flat Bed
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.525%
will be charged on this item
additional
fees applicable
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
09/15/2020 12:00:00 AM CT
Date Ending
09/29/2020 10:21:00 AM CT
Time Remaining
bidding completed
Current High Bid
$6,525.00
# of bids
31
Curr. High Bidder
c****6
First Bid
$1.00
Item Location
Plymouth, MN
Country
US
Lot 65: Dynapath DY-14 14"x40" CNC Flat Bed Engine Lathe with 10" Chuck, Dorian 8 Station Manual Tool Turret, and Tailstock.
Equipped With:
Dynapath CNC Control with Conversation Graphics, 10" 4-Jaw Pratt Burnerd Scroll Chuck, 6 Speeds 25-3000 RPM, Dorian NVIT8-75 8 Station Manual Tool Turret With Bolt-On Tool Holders, Swing Down Chip Guard, Manual Tailstock, Chip Pan, Work Light, Manuals, **Steady Rest and Follow Rest recently Added**
Electrics:
230 Volt 3 Phase
Manufacturer: Dynapath Model: DY-14 Year: 2000 Serial Number: D14T-04502021AA
Main Unit Approx Weight: 0.00 lbs
Main Unit Dimensions (in inches): Length: 0.01" Width: 48.00" Height: 70.00"
Specs:
Control: Dynapath CNC Control
Swing Over Ways: 14"
Max Center Distance: 40"
Cross Slide/Carriage Travels (X , Z): 7.086" / 27.559"
Hole Through Spindle: 2.125"
Spindle Nose: D1-6
Spindle Speeds: 3 Ranges, Low/Med/High 25-3000 RPM
Rapid Traverse Rates (X/Z): 200 IPM
Tailstock Quill Travel: 4.5"
Tailstock Quill Taper: MT No.4
Spindle Drive: 7.5HP
Seller Company: Wagner Spray Tech Corp.
Seller Contact: AMIR HASAN Phone: (763) 553-7000
Item Location: Machinesused.com, 2410 Niagara Lane, Plymouth, MN 55447
Location Contact: Machinesused.com . Phone: (763) 745-1166
Inspection Date & Time: Preview By Appointment with Seller(s) Normal Business Hours M-F
Dock Door: 14' x 14' Door, Ground Level, Paved Lot
Removal Dates and Times: This item must be removed between Tuesday, September 29, 2020 and Friday, October 9, 2020
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by September 30th, 2020 by 4pm
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY October 9th, 2020
- ALL PAYMENTS DUE BY September 30th, 2020 by 4pm
Seller Can Load For Fee of $100 - Basic Lift and Load - Skidding or Crating Not included
Load Fee: $100.00
Bidding Complete
Current Bid: $6,525.00
Bid Increment: $25.00
Minimum Bid: $6,550.00
Bidding Completed